Concrete Mixers IMER MIXING SYSTEM The Imer mixing system is developed through various distinguishing points: the type of largebased drum with reinforcement, the particular geometry of the mixing paddles and the low drum speed. The material mixed, analysed by the system of progressive screens, is homogeneous and well blended. THERMAL PROTECTION All machines with electric motor are fitted with IP 55 switch with no-volt coil. Thermal protection protects the motor against overload; the no-volt coil prevents the machine from being started again inadvertently after a power failure. BOLTED MIXING PADDLES The mixing paddles are bolted for easy replacement; the drum is more resistant to the risks of breakage, which are higher in correspondence with the welding spots in the case of welded paddles. MAXIMUM SAFETY FOR THE OPERATOR All moving parts are adequately protected. QUICK DRIVE BELT TENSIONING Tensioning the motor drive belt is easy and safe
1.Solid and Portable The body is made by iron, and the bottom with 4 wheels, easy to take along. 2.Easy to use and repairSpray gun used for conveying and closed particles coating materials which is less than 2mm.Under the combination of air compressor, atomizing the material, and spraying evenly on the surface of the building. Grouting Packer do the function of conveying and closing couting material. Slurry the material into building interior, to achieve the effect of waterproof and stop leakage. Proper Structure can be repaired to avoid stopping working caused by the repair can be avoided. 3.Fast speed and efficient Speed up to 1200RPM, more efficient. 4.Less waste, less manpower. Hopper design material container, original Hitachi D13VG Drill, adjustable and high torque, suitable for one gear when in using,less waste and manpower.
The ASL 500-T7 is a 21-inch floor grinding machine that offers a powerful grinding/polishing experience.
The aluminum alloy gearbox and planetary gear driver are capable of reaching a remarkably flat grind to produce smooth surfaces as well as a powerful repairing scratches function.
Through the integrated system of the suction port, the machine grind and polish wet or dry.
The ASL T7 is a powerful 21-inch floor grinding/polishing machine
– The grinder can be operated through the control panel
– Planetary gear driver
– Gearbox and motor are made out of aluminum for steadiness and durability
– There are 3 magnetic plates that each hold 3 diamonds (9 total)
– The handle can be rotated 360 degrees to adjust to fit each operator comfortably
– Good service and high quality
– Included accessories: lifting rods, splash guard, 33-foot cable, extra weight, and resin holders
– Can handle jobs wet or dry
– The vacuum port is located on the bottom left of the grinder
– Can run forward or reverse
Feature: Concrete polishing machine is used to produce a smooth finish on flat surfaces for free movement floors. Free movement floors refer to areas where materials handling equipment operate in random, non-defined directions and have an infinate number of travel paths. 1.This series of machine with the multifunctional plate which with magnetic, it’s suitable for all kinds of pads, blade, like velcro-back or metal wheel.
2.Double plate with 6 pieces heads, each time need fix 6 pieces pads (blades). 3.With vacuum cleaner connector could install a vacuum cleaner outside. 4.It with water tank can wet and dry grinding. 5.It’s apply to marble, granite, terrazzo, concrete floor, natural stone floor and rostone floor etc. 6.20KGS addition weight increase the machine weight could promote the work efficiency and effect. 7.It’s easy to control and has stable performance.
Drum capacity/batch output (l) 235/~190
Drum diameter (mm) 702
Wheel dimensions (mm) 370×85
Electric motor power rate 230V/50Hz-400V/50Hz (kW) 1-1
Running current 230V/400V (A) 5/2
Petrol engine power (kW) 2.9
El. motor/petrol eng. LP in operator’s position (db(A)) 72/85
El. motor/petrol eng. machine weight (kg) 119/143
Machine dim. with electric motor w/l/h (mm) 840/1465/1476
Machine dim. with petrol engine w/l/h (mm) 840/1790/1476
Using mechanical expand pressure theory to use Electric Drill to be a Propulsion, small size, 7.2kgs, easy to carry.
0~8000 PSI in few second can let chemical effective to fill into even tiny crack.
To be applicable PU Foaming Agent and EPOXY.
1. When CONSET 3106 touch water, it will inflate immediately expand to form a colloid.
2. Low inflate rate.
4.Good for resist chemical.
5. Good for resist chemical.
6. It can work in drinking water area. Conset 3106 has environmental protection efficacy.