718-TOA Roadline Paint (Reflective) Yellow 3L,4kg – ថ្នាំលាបគំនូសផ្លូវ TOA (មានចំណាំងផ្លាត) ពណ៏លឿង

30.00$

Categories: ,

Based on high quality acrylic resin, chlorinated rubber and high reflective glass bead. The reflection has developed after the paint was applied, then partial of the paint film was scrubbed from the glass bead by traffic and shown it’s reflectivity that remain effective throughout the life of the paint film. These products are suitable for both interior and exterior.

  • High film build easy to apply.
  • Excellent adhesion on both asphalt and concrete surfaces.
  • Good weathering resistant as well as good resistant to oil, grease and other road residues.

Application Area

As topcoat are suitable for road markings and safety symbols on curbs, roads, streets, highways, local roads and car park.

▪️ ស្អិតល្អលើផ្ទៃផ្លូវកៅស៊ូ និងបេតុង
▪️ ធន់នឹងអាកាសធាតុ
▪️ ធន់នឹងប្រេង
▪️ ឆាប់ស្ងួត
▪️ ធន់នឹងសំណឹកផ្សេង…
បង្កើនភាពច្បាស់លាស់ បង្កើនសុវត្ថិភាពចរាចរណ៍
ជាមួយនឹងថ្នាំលាបផ្លូវ TOA R O A D L I N E P A I N T
✅គូរ​បន្ទាត់​ចរាចរណ៍​
✅លាប​គែម​ផ្លូវ​ថ្មើរជើង​
✅ផ្លូវបំបែក
✅សញ្ញាចំណតយានយន្ត
✅គូរនិមិត្តសញ្ញាផ្សេងៗនៅលើផ្លូវ
ប្រើថ្នាំ តូអា រូដឡាញ ពណ៌ភ្លឺស្រស់ថ្លា ស្ងួតលឿន គ្មានស្នាម និងជាប់ធន់បានយូរជាងគេ❗️

Description

FEATURES

TOA Roadline Paints(Reflective) are based on high quality acrylic resin, chlorinated rubber

and high reflective glass bead. The reflection has developed after the paint was applied, then
partial of the paint film was scrubbed from the glass bead by traffic and shown it’s reflectivity
that remain effective throughout the life of the paint film. These products are suitable for both
interior and exterior. The properties of these paints are high film build, excellent adhesion on
both asphalt and concrete surfaces, good weathering resistant as well as good resistant to oil,
grease and other road residues.
These paints are suitable for road markings and safety symbols on curbs, roads, streets, highways,
local roads and car park.

TECHNICAL INFORMATION

Type Acrylic Resin and Chlorinated Rubber
Color White, Yellow, Red and Black
Film appearance Matt
Solid by volume 60.0 ± 2.0 %
Solid by weight 55.0 ± 2.0 %
Flash point 7.9 °C
Volatile organic compounds (VOCs) NA gram / liter
Wet film thickness 100 microns
Dry film thickness 55 microns
Theoretical coverage. 8-10 sq.m. / liter / coat
24-30 sq.m. / gallon / coat
Remark – Actual Surface coverage will depend on surface irregularities, Mixing, Application Condition
method and technique; as well as the structure and dimensions of the object to be coated.
Touch dry ( 25-30 °C) 10 –20 minutes.
Recoat dry ( 25-30 °C) 1 hours.
Full cure ( 25-30 °C) 3 days.

APPLICATION

Tools Roller, Brush
Thinner No. TOA Thinner # 81
Dilution (%) 10 % ( roller and brush )
APPLICATION SYSTEM
Surface Preparation
Old surface 1.Chalky surfaces or loose material must be removed by stiff brush.
2.The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
New surface 1.The surface must be clean with suitable cleansing solution and water then rinse thoroughly with
fresh water and allow to fully dry.
Coating system
Primer : To enhance the adhesion, recommend to apply TOA Penetrating Sealer at least 1 coat on hard
or smooth surface such as polished cement floor

 

Topcoat Mixing ratios between TOA ROADLINE PAINT and TOA Thinner #81 are 20:2 for first coat and 7:1 for
second coat, respectively.
Apply by brush withTOA ROADLINE PAINT at least 2 coats.(Recoatable time is at least 1 hours)
Recommendation : The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of
the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation
is required in confined areas to ensure correct drying.

HANDLING AND STORAGE
Storage condition : The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
Containers must be kept tightly closed.
Shelf life : 2 years.

HEALTH AND SAFETY
: Please observe the precautionary notices displayed on the container. Use under well ventilated
conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin should immediately
be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and
medical attention sought immediately.
: For detailed information on the health and safety hazards and precautions for use of this product,
we refer to the Material Safety Data Sheet.

DISCLAIMER
: The information in this data sheet is given to the best of our knowledge based on laboratory testing
and practical experience. However, as the product is often used under conditions beyond our control,
we cannot guarantee anything only the quality of the product itself. We reserve the right to change
the given data without notice.