SikaShield P34 MG EG 4mm
$75.00
Torch-on sheet waterproofing membrane
SikaBit® PRO P-40-0 MG
PLASTOMERIC MODIFIED BITUMINOUS WATERPROOFING MEMBRANE
DESCRIPTION
SikaBit® PRO P-40-0 MG is an APP modified, bitumin-
ous, torch-applied, waterproofing membrane. It is re-
inforced with a dimensionally stable non-woven poly-
ester inlay. The underside has a thin polyethylene
burn-off film for easy application. It can be applied to
wood, metal and concrete substrates including over
existing bitumen roofing membranes. Top surface fin-
ish: mineral granules. Thickness: ~4,0 mm
USES
Waterproofing membrane for:
Retaining walls and basements
Flat roofs under protective layers or ballast
Balconies and terraces under tiles
Wet rooms
Underground car parks
Raft slabs
As a top sheet in a double layer roofing system
Protection of various substrates in a wide range of
applications
CHARACTERISTICS / ADVANTAGES
Good watertightness
Good elongation and cold flexibility
Good mechanical properties (tensile, tear, shear)
Good resistance to impact
Easy to install by torching method
Choice of primers to suit substrate and weather con-
ditions
Description
PRODUCT INFORMATION
Composition APP modified bitumen
Reinforcing Material Non-woven polyester fabric
Packaging Roll size
Length 10,00 m
Width 1,00 m
Appearance / Colour Top surface Mineral granules
Backing Polyethylene film
Shelf life 12 months from date of production
Product must be stored in original unopened and undamaged sealed pack-
aging in dry conditions and temperatures between +5 °C and +35 °C. Store
Storage conditions
1 / 4
in a vertical position. Do not stack pallets of the rolls on top of each other,
or under pallets of any other materials during transport or storage. Always
refer to packaging.
Length 10 m
Width 1 m
Effective Thickness 4,0 mm ± 5 % (EN 1849-1)
TECHNICAL INFORMATION
Resistance to Impact ≥ 600 mm at +23 °C (EN 12691- Method A)
Tensile Strength Longitudinal 600 N/50 mm ± 20 %
Transversal 400 N/50 mm ± 20 %
(EN12311-1)
Elongation Longitudinal 30 % ± 15 %
Transversal 30 % ± 15 %
(EN12311-1)
Tear Strength Longitudinal 150 N ± 30 %
Transversal 150 N ± 30 %
(EN 12310-1)
Joint Shear Resistance Longitudinal Min. 500 N/50mm
Transversal Min. 350 N/50mm
(EN 12317-1)
Flow Resistance ≥ 120 °C (EN 1110)
Watertightness 60 kPa (EN 1928-Method B)
APPLICATION INFORMATION
Ambient Air Temperature +5 °C min. / +50 °C max.
Relative Air Humidity 80 % max
Substrate Temperature +5 °C min. / +50 °C max.
