SikaShield P34 S 3mm
$60.00
Torch-on sheet waterproofing membrane
SikaBit® PRO P-30-0 Sand
PLASTOMERIC MODIFIED BITUMINOUS WATERPROOFING MEMBRANE
DESCRIPTION
SikaBit® PRO P-30-0 Sand is an APP modified, bitumin-
ous, torch-applied, waterproofing membrane. It is re-
inforced with a dimensionally stable non-woven poly-
ester inlay. The underside has a thin polyethylene
burn-off film for easy application. It can be applied to
wood, metal and concrete substrates including over
existing bitumen roofing membranes. Top surface fin-
ish: sand. Thickness: ~3,0 mm
USES
Waterproofing membrane for:
Damp proofing of the exterior walls of basements
against percolating water and damp soil
Flat roofs under protective layers or ballast
Balconies and terraces under tiles
Wet areas
Protection of various substrates in a wide range of
applications.
CHARACTERISTICS / ADVANTAGES
Good watertightness
Good elongation and cold flexibility
Good mechanical properties (tensile, tear, shear)
Good resistance to impact
Easy to install by torching method
Choice of primers to suit substrate and weather con-
ditions
Description
PRODUCT INFORMATION
Composition APP modified bitumen
Reinforcing Material Non-woven polyester fabric
Packaging Roll size
Length 10,00 m
Width 1,00 m
Appearance / Colour Top surface Sand
Backing Polyethylene film
Shelf life 12 months from date of production
Product must be stored in original unopened and undamaged sealed pack-
aging in dry conditions and temperatures between +5 °C and +35 °C. Store
in a vertical position. Do not stack pallets of the rolls on top of each other,
or under pallets of any other materials during transport or storage. Always
Storage conditions
1 / 3
refer to packaging.
Length 10 m
Width 1 m
Effective Thickness 3,0 mm ± 5 % (EN 1849-1)
TECHNICAL INFORMATION
Resistance to Impact ≥ 600 mm at +23 °C (EN 12691- Method A)
Tensile Strength Longitudinal 600 N/50 mm ± 20 %
Transversal 400 N/50 mm ± 20 %
(EN12311-1)
Elongation Longitudinal 30 % ± 15 %
Transversal 30 % ± 15 %
(EN12311-1)
Tear Strength Longitudinal 150 N ± 30 %
Transversal 150 N ± 30 %
(EN 12310-1)
Joint Shear Resistance Longitudinal Min. 500 N/50 mm
Transversal Min. 350 N/50 mm
(EN 12317-1)
Flow Resistance ≥ 120 °C (EN 1110)
Watertightness 60 kPa (EN 1928-Method B)
APPLICATION INFORMATION
Ambient Air Temperature +5 °C min. / +50 °C max.
Relative Air Humidity 80 % max
Substrate Temperature +5 °C min. / +50 °C max.
