TOA ROOF PAINT #R190 1GL (RUSIC RED) 4kg- ថ្នាំលាបដំបូលគ្រឿង ឥដ្ឋការ៉ូឡា កំរាលផ្លូវ ទីលានបាល់បោះ និងគំនូសសញ្ញា
28.50$
ឆ្នាំ
លាបឥដ្ឋផ្លូវដើរ លាបកំរាលផ្លូវ លាបរបងឈើ លាបកំរាលទីលានបាល់បោះ និងទីលានវាយកូនបាល់ លាបគែមផ្លូវ និងគំនូសសញ្ញាផ្សេងៗ…។TOA Acrylic Emulsion Roof Paints is a water-based roof paint,based on 100% premium quality pure
acrylic resin, that provides high sheen finish,endurable for UV Light, chemicals, water and scratch.
It has a tough and durable film that gives excellent protection and adhesion to the surfaces.
Protect discolouration by efflorescence.Contains no added lead and no added mercury for health and
environmentally safe.
It is ideal for application of concrete roof, asbestos, all kinds of fiber cement and tennis court.
TOA Roof Paint, a multi-purpose painting not only apply for multi-tile but also apply for all concrete courts which are tennis and basketball court and so on, Brick, and others surface.
TOA Roof paint made from 100% acrylic which can be tightly adhered to all types of tile. The film does not capture dust because of its smooth film blended with special UV-resistant pigments provides long-lasting, fade-free, mercury and lead-free without harm from rainfall for user-friendly consumption. There are more than 30 shades.
Type : Acrylic Emulsion Polymer
Color : Clear
Film Appearance : Semi-Gloss
UV protection provided long lasting film
● 100% Emulsion paint high quality acrylic.
● Anti-fungus/Algae.
● Slightly gloss film.
● Resistant to sunlight, chemicals, and scrubbiness.
● Suitable for Thailand climate.
Multi-Purporse paint for every type of tile
Suitable for use as tile, carved tile, ceramic tile, all kinds of asbestos cement tiles.
And tennis courts.
Description
TECHNICAL INFORMATION
- Type 100% Pure Acrylic Emulsion Paint
- Color Wide range of colours . Please refer to catalog.
- Film appearance Semi-Gloss
- Solid by volume 38-40 %
- Solid by weight 51-53 %
- Flash point N/A ํC
- Wet film thickness 100-110 microns
- Dry film thickness 40-45 microns
- Theoretical coverage. 30-40 sq.meter / gallon / coat Remark – Actual Surface coverage will depend on surface irregularities, mixing, application condition
method and technique; as well as the structure and dimensions of the object to be coated. - Touch dry ( 25-30 ํC) 30 minutes
- Recoat dry ( 25-30 ํC) 2 hours
- Full cure ( 25-30 ํC) 7 days
APPLICATION
- Tools Roller, Brush, Spray
- Diluent Clean Water
- Dilution (%) 5-10 % ( roller and brush )
10-20 % ( spray )
The dilution could be done depends on the variation of temperature and humidity atmosphere.
The given figure is the average data from actual use.
(Clean the equipment with water immediately after use
Surface Preparation
New surface : Substrate must be completely cured and dried free from oil, grease, mildew, from release agents and
foreign matter or measure moisture which should be less than 14% on the surface with protimeter mini.
If any crack, it should be repaired on the surface before applying
Old surface: Powdery and chalky surface must be scrubbed and cleaned with water. Measure moisture which
should be less than 14% on the surface with protimeter mini. Fungus and mildew growth must be
cleaned off with water. Leave to dry for 1-2 days. Apply TOA 113 Microkill copiously by using brush or
roller then leave to dry for at least 3 hrs. without rinsing.
If any crack, it should be repaired on the surface with suitable materials before applying
Coating system
Primer For New Surface –
Primer For Old Surface Apply 1 coat of multi-purpose primer TOA QUICK PRIMER. Allow at least 2 hrs. drying.
Topcoat Apply 2-3 coats of TOA ROOF PAINT without primer for new surface. Allow at least 2 hrs. drying.
Shelf Life : 5 years at 30-35 oC.
