Description
TECHNICAL INFORMATION
- Type 100% Pure Acrylic Emulsion Paint
- Color Wide range of colours . Please refer to catalog.
- Film appearance Semi-Gloss
- Solid by volume 38-40 %
- Solid by weight 51-53 %
- Flash point N/A ํC
- Wet film thickness 100-110 microns
- Dry film thickness 40-45 microns
- Theoretical coverage. 30-40 sq.meter / gallon / coat Remark – Actual Surface coverage will depend on surface irregularities, mixing, application condition
method and technique; as well as the structure and dimensions of the object to be coated. - Touch dry ( 25-30 ํC) 30 minutes
- Recoat dry ( 25-30 ํC) 2 hours
- Full cure ( 25-30 ํC) 7 days
APPLICATION
- Tools Roller, Brush, Spray
- Diluent Clean Water
- Dilution (%) 5-10 % ( roller and brush )
10-20 % ( spray )
The dilution could be done depends on the variation of temperature and humidity atmosphere.
The given figure is the average data from actual use.
(Clean the equipment with water immediately after use
Surface Preparation
New surface : Substrate must be completely cured and dried free from oil, grease, mildew, from release agents and
foreign matter or measure moisture which should be less than 14% on the surface with protimeter mini.
If any crack, it should be repaired on the surface before applying
Old surface: Powdery and chalky surface must be scrubbed and cleaned with water. Measure moisture which
should be less than 14% on the surface with protimeter mini. Fungus and mildew growth must be
cleaned off with water. Leave to dry for 1-2 days. Apply TOA 113 Microkill copiously by using brush or
roller then leave to dry for at least 3 hrs. without rinsing.
If any crack, it should be repaired on the surface with suitable materials before applying
Coating system
Primer For New Surface –
Primer For Old Surface Apply 1 coat of multi-purpose primer TOA QUICK PRIMER. Allow at least 2 hrs. drying.
Topcoat Apply 2-3 coats of TOA ROOF PAINT without primer for new surface. Allow at least 2 hrs. drying.
Shelf Life : 5 years at 30-35 oC.